Refractory

Block Making Machinery using the Semi-Dry Mix process ensures high production output with low unit costs, and is a process suitable for most aggregates.... more

BOX FEEDERS Accepts and delivers almost any type of raw material from the quarry or stockpile. Electronic variable speed drive feeds at a controlled rate to next stage of manufacture. Also suitab... more

HEAVY DUTY TOOTHED CRUSHING ROLLERS ( TCR ) Crushes large pieces of hard shale clays and fireclays of 450 to 1000mm cube size prior to grinding mill or other plant. Drive through triple reduction... more

DISINTEGRATORS ‘D’ Series machines to reduce medium / soft clay, moist clays and shales. Possible alternative to wet or dry grinding mills where the material is friable and does not re... more

INCLA II AND INCLA III DRY GRINDING MILLS Heavy duty mills capable of grinding shales, marls and clays of a dry nature at high outputs. Fitted with inclined grids, roller suspension device (option... more

GMF WET GRINDING MILLS Three models, 2.1 metre, 2.7metre and 3.3metre diameter bases available each accommodating two rollers running on overlapping tracks. Perforated grid discharge onto single... more

FIXED AND SLIDING BEARING TYPE ROLLER MILLS Various machine sizes available. Can be run at medium or high speed. Variable outputs dependent upon material and roll gap setting. Fitted with breake... more

DOUBLE SHAFTED MIXERS Normally positioned just prior to the extruder in the plant layout for mixing dry and plastic clays with water and / or other materials. Fitted with fully adjustable 28% chr... more

Our extensive range includes models suitable for both soft and stiff extrusion and most extruded sections eg: clay brick, hollow block, tile bats or sewer pipe at hourly capacities of between 5-80 to... more

SIDE CUTTER TYPE CTC MK4 Basic design cuts bricks or hollow blocks from soft to medium stiff extruded column with maximum cross section of 305 X 230mm. Cuts measured length or ‘slug’ f... more

VERTICAL PIPE MACHINES Standard or heavy duty machines available (arranged to suit prepared clay feed). Supplied with either manual, semi-automatic or fully automatic control. Available in a rang... more

RE-PRESS M/C’s FOR EXTRUDED BRICK AND TILE BLANKS Single or double machines independently driven and fed with extruded brick or tile clods. Continuous running when pressing with automatic fe... more

HYDRAULIC PRESS FOR SPECIAL SHAPES 40 to 60 tonne capacity press x 125mm stroke for use in production of special shapes. Suitable for pressing almost any shape of extruded section. Protected by... more

FINGER AND TRANSFER CAR Transports bricks, blocks or other products up to 5 or 6 rows deep and 14 rows high to and from storage frames and drying chambers at high speed. Electrically powered and d... more